How To Reset Ninestars Trash Can Lid

Doesn’t your Ninestars Trash Can Lid function correctly?

Then, resetting the touchless trash can lid will be a simple solution to that issue.

Now, the question is- how to reset Ninestars Trash Can Lid?

Hold down the open and close button together until the lid is reset. You can also try the 24-hour factory reset method, which we will explain later. 

Apart from this, this guide will break down:

• When should you reset your trash can lid?
• What to do if resetting the trash can lid won’t bring any luck?

So, keep reading till the end.

Table of Contents

• When Should You Reset Ninestars Trash Can Lid?
• How To Reset Ninestars Trash Can Lid: Step-by-Step Guide
  • Step 1. Set the Power Switch To Off
  • Step 2. Remove The Batteries
  • Step 3. Clean The Sensor Area
  • Step 4. Reinsert the Batteries after 24 Hours
  • Step 5. Test the Lid
• What If The Ninestars Trash Can Lid Malfunctions After Resetting?
• FAQs
•  Conclusion

When Should You Reset Ninestars Trash Can Lid?

Here are some common scenarios when you should reset your Ninestars Trash Can Lid:

• Trash Can Lid Won’t Open: A reset can help if the garbage can lid won’t open or close. It occurs due to low battery, sensor obstruction, or motor failure.

• Trash Can Lid Won’t Close: The garbage can lid gets stuck in the open position and the indicator light blinks a constant green even though there is no restriction in the sensor area.

• Touchless Trash Can Lid Opens and Closes Repeatedly: Does the trash can lead open and close like a ghost even when there is no object within the sensor area? Then, resetting the lid can fix this issue. This lid issue occurs due to a malfunctioning sensor or misalignment.

• Indicator Light Blinks Constantly: The indicator light blinks a constant green or yellow, indicating an obstruction in the sensor area or the batteries are low. 

How To Reset Ninestars Trash Can Lid: Step-by-Step Guide

To reset your Ninestars Trash Can Lid, hold down the close and the open buttons together until the lid is reset. 

Alternatively, you can try the 24-hour factory reset as follows: 

Step 1. Set the Power Switch To Off

Flip the power switch of the Ninestar Trash Can to Off. 

Most Ninestars models have a power switch hidden under the lid. Remove the trash can lid and turn it over. 

Then, set the power switch to Off. The circle icon on the switch indicates the Off position.

Step 2. Remove The Batteries

Once you turn off the power switch, it’s time to remove the batteries from the battery compartment.

The battery compartment is located next to the power switch. Remove the battery cap from the compartment and pull out the batteries. 

Leave your trash can for 24 hours in this condition. 

Step 3. Clean The Sensor Area

After removing the battery, it’s time to clean the sensor and its surrounding area. Dirt, debris, and grime on the infrared sensor can prevent it from detecting motion. 

To clean the trash can infrared sensor, wipe the sensor with a damp microfiber cloth. 

Verify that the sensor area is free from obstruction or dirt buildup that could prevent the lid mechanism from working smoothly. 

Step 4. Reinsert the Batteries after 24 Hours

Reinstall the batteries in the battery compartment. Ensure that the batteries are fresh. Insert the batteries following the positive and negative markings. Afterward, replace the battery cap in its place to cover the batteries.

Step 5. Test the Lid

Flip your power switch to On. The line on the switch indicates the On position. 

Finally, wave your hand over the lid to check its responsiveness. If the trash can lid opens and closes as expected,

Congratulations!

You reset your Ninestars Trash Can Lid successfully. 

What If The Ninestars Trash Can Lid Malfunctions After Resetting?

If the trash can lid doesn’t function after resetting, look for the following issues:

• There is a restriction around the sensor area
• The infrared sensor is dirty.
• Low or dead batteries
• The lid gets knocked off the track.
• Lid mechanism failure

To discover the solutions to those issues, read these articles:

• Ninestars Trash Can Troubleshooting
• Ninestars Trash Can Lid Not Opening All The Way

FAQs

Why does my Ninestars trash can lid keep opening and closing?

Ninestars Trash Can Lid keeps opening and closing if the infrared sensor detects motion or objects within its range. Ensure the sensor area is clean and adjust the trash can location if required. 

What size batteries does my Ninestars trash can need?

Ninestars Trash Can requires four ‘D’ size batteries to power the motor and the sensor system.

How often should I replace the batteries in my Ninestar trash can?

Typically, the batteries in the Ninestars Trash Can last around 3 to 6 months, based on the usage frequency. I recommend you replace the batteries when the green light flashes frequently or the responsiveness of the lid decreases. 

 Conclusion

A simple reset to the trash can lid is an efficient way to tackle common problems like the lid won’t open or close. 

Hold down the two buttons on the lid until the green light appears to reset your Ninestars Trash Can Lid. 

Or, follow our step-by-step guides to factory reset the trash can lid.