Frigidaire Garbage Disposal Reset Button

Frigidaire Garbage Disposal has a reset button on the side of the unit, opposite the power cord or the discharge elbow.

The reset button is a safety feature that protects the unit from damage due to overloading or overheating. 

Besides, the reset button helps you revive the garbage disposal if the unit shuts down suddenly. 

This article will describe everything you need to know about the reset button on Frigidaire Garbage Disposal. 

In This Article:

• What Is The Function of Reset Button On Garbage Disposal?
• What Causes The Reset Button On Frigidaire Garbage Disposal To Trip?
• How To Reset Frigidaire Garbage Disposal Using The Reset Button?
• How To Prevent the Reset Button On Garbage Disposal From Tripping?
• FAQs
• Conclusion

What Is The Function of Reset Button On Garbage Disposal?

The reset button on a garbage disposal is a built-in safety device that protects the unit from damage due to overload or overheating. 

On Frigidaire Garbage Disposal, you can locate the reset button on the side of the unit, opposite the power cord or the disposal elbow. The reset button acts as a mini circuit breaker. 

If you overload the garbage disposal with food waste, the unit can’t cope with the feed of food waste and run for an extended period. Consequently, the motor gets overheated, which trips the reset button to shut off the unit to prevent damage. 

Similarly, putting avoided food waste like fruit pits or non-food items (spoons or plastic) in the disposal causes a clog and restricts the turntable. 

Because of the restricted turntable, the disposal tries to spin the impellers but fails when turned on the unit. It strains the motor, causing the reset button to pop to prevent motor burnout. 

In short, the reset button on Frigidaire Garbage Disposal is a safety feature that protects the unit from damage due to overload or overheating. 

What Causes The Reset Button On Frigidaire Garbage Disposal To Trip?

Overloading, jam in the garbage disposal, and overheating are some issues that trip the reset button on a garbage disposal.

• Overloading: Throwing excessive food waste into the garbage disposal at once can cause overloading. Overloading a garbage disposal means a clog, which trips the safety button.  

• Jamming: If you put unprohibited food waste like celery, fruit pits, bones, or non-food items in the disposal, they could cause a jam and restrict the turntable. Consequently, the reset button can trip due to the clog to protect the motor from damage.

Read Further: What Not To Put In A Garbage Disposal

• Overheating: Operating the disposal unit for an extended period without a break can overheat the motor, causing the reset button to pop out.

• Electrical Issues: Fluctuation in the power supply, like a sudden power surge, can cause the reset button to pop to protect the unit from damage.

• Clogged Drain Line: The drain line can become blocked if you put rice or pasta in the disposal, as they expand when they come into contact with water. Due to the clogged drain line, the disposal unit fails to expel the garbage, causing the reset button to trip. 

How To Reset Frigidaire Garbage Disposal Using The Reset Button?

To reset your Frigidaire Garbage Disposal, follow these instructions:

• Unplug your garbage disposal or flip the circuit breaker to the Off position based on the wiring configuration of the disposal unit.

• Resolve the underlying issue that causes the reset button to pop out. Check the grinding chamber and remove restrictions from the disposal unit.

• Locate the reset button. It is on the opposite of the power cord or the discharge elbow.

• Push the reset button in until it clicks and remains depressed.

• Restore the electric power to the unit.

• Run cold water and turn on the unit to test the operation. 

How To Prevent the Reset Button On Garbage Disposal From Tripping?

To prevent the reset button from tripping, follow these garbage disposal maintenance tips or best practices:

• Don’t overload the garbage disposal with food waste. Instead, feed the waste into the grinding chamber gradually and slowly.

• Run cold water before, during, and after using the disposal unit to flush out the food particles smoothly.

• Put only wood waste that your disposal unit can handle. For example, throw soft vegetable scraps and small bones in the disposal unit.

• Cut large food items into smaller pieces before putting them in the garbage disposal to help grind.

• Use the garbage disposal regularly to keep the internal components in working status and prevent them from rusting.

• Clean the disposal unit once a week. Use baking soda and vinegar to remove food buildup from the grinding chamber.

• Never put fibrous foods like corn husks, celery, and onion skins in the garbage disposal, as they can wrap around the impellers and cause jam.

• Before operating the disposal unit, ensure there are no foreign objects like screws or spoons in the disposal.

• Never turn off the disposal until the grinding process is complete. Run cold water for a few seconds after the grinding process is ended to let the food particles flush down the drain smoothly. 

FAQs

What should I do if the reset button does not fix the problem?

If pressing the reset button doesn’t bring any luck, ensure the grinding chamber is free from restrictions. Then, verify that the disposal unit is getting power to operate. 

Can I reset the garbage disposal while it is still plugged in?

No, it’s not recommendable. Experts suggest pressing the reset button while the disposal unit remains unplugged. 

What type of waste should I avoid to prevent the reset button from tripping?

Avoid fibrous food (celery, corn husks), hard items (fruit pits, eggshells), and non-food items like plastic, spoons, or fork from putting in the garbage disposal to prevent the reset button from tripping. 

Is it normal for the reset button to trip during normal use?

No, it’s not normal for the reset button to trip during normal use. If the reset button pops out during usage, I suspect the unit detects an issue.

Conclusion

In conclusion, a reset button on  your Frigidaire garbage disposal is a safety feature. It protects the disposal unit against overheating. 

The safety mechanism of garbage disposal typically gets activated when you overload the disposal unit or the unit gets overheated due to a clog. 

Resetting the garbage disposal will be a simple fix to this issue. Regarding this, turn off the unit, remove the blockage that causes the reset button to pop up, and press the reset button. 

To prevent the reset button from tripping again in the future, follow the garbage disposal maintenance tips mentioned above. 

Don’t hesitate to call a professional if the problem persists. 

Read Also:

• InSinkErator Garbage Disposal Reset Button
• Moen Garbage Disposal Reset Button
• Frigidaire Garbage Disposal Troubleshooting